News
Is the UV curable adhesive component-photoinitiator really important?
The photoinitiator in the uv glue should pay attention to its absorption spectrum to match the emission spectrum of the light source. At the same time, for better reaction, a composite photoinitiator can be used. Only by using a good photoinitiator, the curing of UV glue can achieve good results.
The photoinitiator in the uv glue should pay attention to its absorption spectrum to match the emission spectrum of the light source. At the same time, for better reaction, a composite photoinitiator can be used. Only by using a good photoinitiator, the curing of UV glue can achieve good results.
Development of photoinitiators
2021-06-02
1. Free radical-cation hybrid photoinitiator
The free radical research and development system cures fast, but shrinks greatly. While cationic light curing has small volume shrinkage, strong adhesion, the curing process is not blocked by oxygen, the reaction is not easy to terminate, and the "post-curing" ability is strong, suitable for light curing of thick films, but the curing speed is slow. Combining the advantages of the two, the free radical and cationic photoinitiator are formulated into a hybrid system, which can not only polymerize tourists with cationic polymerization, but also maximize the strengths and avoid weaknesses, and has a synergistic effect. Compatible use of two or more photoinitiators can achieve more satisfactory results.
2. Visible light initiator
Fluorinated diphenyl titanocene (Irgacure 784) and bis(pentafluorophenyl) titanocene have outstanding photoinitiation activity, storage stability and low toxicity, and their absorption wavelength has been extended to 500nm, which has a larger visible light region. Absorbing, it is particularly effective for visible light-initiated polymerization and curing of acrylic esters. In addition, due to the photobleaching effect of the titanocene light, the yellowing index of the film is small; and the deep curing is good, which is conducive to the thorough curing of the thick film. The activity of fluorinated diphenyl titanocene photoinitiator is 2~6 times higher than 2% Irgacure651 in the acrylate system.
3. Water-based photoinitiator (WSP)
The ammonium salt or sulfonate functional group is introduced into the common photoinitiator to make it compatible with water to make the water-based photoinitiator. The main types are aromatic ketones, including benzophenone derivatives, thioxanthone derivatives, alkyl aryl ketone derivatives, and benzyl derivatives.
4. Macromolecular photoinitiator
The common photoinitiator is introduced into the macromolecular chain to become the macromolecular photoinitiator, which has good compatibility with the resin, does not migrate after curing, is not easy to volatilize, and reduces the odor. Macromolecular photoinitiators can be divided into four types: side chain cleavage type, main chain cleavage type, side chain hydrogen abstraction type and main chain hydrogen abstraction type. Side chain cleavage type macromolecular photoinitiators are currently more successful.
5. Double curing
That is, the combination of light curing and other curing methods complements each other and highlights the advantages. It has fast curing at low temperature, excellent stability, can avoid separation and uncured, and obtain cured products with excellent mechanical properties and dimensional stability. The development of a dual curing system shared by light curing and other curing methods is effective in overcoming the weaknesses of light curing adhesives, expanding the scope of application and improving competitiveness. Other curing methods: thermal curing, moisture curing, oxidative curing, anaerobic curing, etc.
1. Free radical-cation hybrid photoinitiator
The free radical research and development system cures fast, but shrinks greatly. While cationic light curing has small volume shrinkage, strong adhesion, the curing process is not blocked by oxygen, the reaction is not easy to terminate, and the "post-curing" ability is strong, suitable for light curing of thick films, but the curing speed is slow. Combining the advantages of the two, the free radical and cationic photoinitiator are formulated into a hybrid system, which can not only polymerize tourists with cationic polymerization, but also maximize the strengths and avoid weaknesses, and has a synergistic effect. Compatible use of two or more photoinitiators can achieve more satisfactory results.
2. Visible light initiator
Fluorinated diphenyl titanocene (Irgacure 784) and bis(pentafluorophenyl) titanocene have outstanding photoinitiation activity, storage stability and low toxicity, and their absorption wavelength has been extended to 500nm, which has a larger visible light region. Absorbing, it is particularly effective for visible light-initiated polymerization and curing of acrylic esters. In addition, due to the photobleaching effect of the titanocene light, the yellowing index of the film is small; and the deep curing is good, which is conducive to the thorough curing of the thick film. The activity of fluorinated diphenyl titanocene photoinitiator is 2~6 times higher than 2% Irgacure651 in the acrylate system.
3. Water-based photoinitiator (WSP)
The ammonium salt or sulfonate functional group is introduced into the common photoinitiator to make it compatible with water to make the water-based photoinitiator. The main types are aromatic ketones, including benzophenone derivatives, thioxanthone derivatives, alkyl aryl ketone derivatives, and benzyl derivatives.
4. Macromolecular photoinitiator
The common photoinitiator is introduced into the macromolecular chain to become the macromolecular photoinitiator, which has good compatibility with the resin, does not migrate after curing, is not easy to volatilize, and reduces the odor. Macromolecular photoinitiators can be divided into four types: side chain cleavage type, main chain cleavage type, side chain hydrogen abstraction type and main chain hydrogen abstraction type. Side chain cleavage type macromolecular photoinitiators are currently more successful.
5. Double curing
That is, the combination of light curing and other curing methods complements each other and highlights the advantages. It has fast curing at low temperature, excellent stability, can avoid separation and uncured, and obtain cured products with excellent mechanical properties and dimensional stability. The development of a dual curing system shared by light curing and other curing methods is effective in overcoming the weaknesses of light curing adhesives, expanding the scope of application and improving competitiveness. Other curing methods: thermal curing, moisture curing, oxidative curing, anaerobic curing, etc.
Photoinitiator supply
2021-06-07
Water treatment agents are agents for purifying water quality
At the same time, there is great competition in the water treatment chemicals market. Water treatment is now not only the introduction and use of various water treatment special equipment, but also plays a big role in water treatment chemicals. Water treatment chemicals are now and in the future. The necessary chemicals for sewage treatment, the prospects are very optimistic.
Water treatment chemicals are specially used for sewage clarification. Everyone knows that there are many processes for water quality treatment. Therefore, the classification of water treatment chemicals is very wide, including organic water treatment and inorganic water treatment chemicals, which are dedicated to cleaning scales. Of descaling agent. These different chemicals all play a very important role in water treatment and can be said to be the most important treatment link in water treatment.
Water treatment chemicals are not only effective in the precipitation of sewage flocculants, but also in the treatment of sludge dewatering. They are also very effective in the treatment of industrial wastewater. It is inevitable that some polluted wastewater will be produced in the industry, and water treatment chemicals can treat these wastewater, so that the sewage can be purified again and recycled again, saving water resources and protecting the water environment. Hao Nuo water treatment chemicals manufacturers are willing to work with environmentalists to maintain the cleanness of human water resources.
At the same time, there is great competition in the water treatment chemicals market. Water treatment is now not only the introduction and use of various water treatment special equipment, but also plays a big role in water treatment chemicals. Water treatment chemicals are now and in the future. The necessary chemicals for sewage treatment, the prospects are very optimistic.
Water treatment chemicals are specially used for sewage clarification. Everyone knows that there are many processes for water quality treatment. Therefore, the classification of water treatment chemicals is very wide, including organic water treatment and inorganic water treatment chemicals, which are dedicated to cleaning scales. Of descaling agent. These different chemicals all play a very important role in water treatment and can be said to be the most important treatment link in water treatment.
Water treatment chemicals are not only effective in the precipitation of sewage flocculants, but also in the treatment of sludge dewatering. They are also very effective in the treatment of industrial wastewater. It is inevitable that some polluted wastewater will be produced in the industry, and water treatment chemicals can treat these wastewater, so that the sewage can be purified again and recycled again, saving water resources and protecting the water environment. Hao Nuo water treatment chemicals manufacturers are willing to work with environmentalists to maintain the cleanness of human water resources.
Water treatment agent application landscape water
Therefore, the use of water treatment agent technology for water treatment is highly efficient and environmentally friendly. It provides favorable conditions for growth, biochemical effects are formed, and the biochemical effects of microorganisms effectively remove organic and inorganic pollutants, which provide the next stage of water treatment. Favorable conditions.
Therefore, the use of water treatment agent technology for water treatment is highly efficient and environmentally friendly. It provides favorable conditions for growth, biochemical effects are formed, and the biochemical effects of microorganisms effectively remove organic and inorganic pollutants, which provide the next stage of water treatment. Favorable conditions.
Previous
1
2
Next
Service Hotline
ADD: 3808-5, ZhengCheng Road, Huangtu Town, Jiangyin City, Jiangsu Province, China
TEL: 86-17798763151
FAX: 86-510-86195596
E-MAIL: sales@juminghem.com
Copyright © 2021 Jiangsu Juming Chemical Process Technology Co., Ltd. 苏ICP备18043781号-1 Powered by www.300.cn Business license